Chefmate CC12 Bedienerhandbuch PDF herunterladen (Seite 13)

Page 13

Simple Maintenance and Repair

SHARP KNIFE BLADE

TO AVOID SERIOUS PERSONAL INJURY:

• ALWAYS turn off slicer and unplug slicer before servicing.

• NEVER touch this slicer without training and authorization from your supervisor.

• ALWAYS keep hands clear of rotating knife and moving parts.

• DO NOT tamper with, bypass, or remove any safety devices, guards or switches.

• ALWAYS turn off slicer and turn slice thickness dial completely clockwise after each use.

LUBRICATION

Various slicer parts need to be lubricated periodically using Globe oil. Globe oil is a light, tasteless, odorless

mineral oil that will not contaminate or impart odors or taste to sliced food products.

DO NOT USE VEGETABLE OIL TO LUBRICATE SLICER.

VEGETABLE OIL WILL DAMAGE THE SLICER!

Food Chute Slide Rod

It is necessary to lubricate the food chute slide rod with Globe oil if the food chute becomes

difcult to push.

1. Close the slicer table, unplug the slicer and remove the food chute.

2. Tilt the slicer on its end. Remove the feet and bottom enclosure to access the round slide rod.

3. Put several drops of Globe oil on the round slide rod (Fig. 13-1) towards

the top of the rod.

4. Reattach bottom enclosure and feet before tilting the slicer back to its normal position.

5. Push the food chute arm back and forth several times to distribute the oil

onto the slide rod.

6. Reinstall the food chute.

7. Plug the slicer in.

Figure 13-1

Slide Rod

1 2 ... 8 9 10 11 12 13 14 15 16

Keine Kommentare

Chefmate CC12 Bedienerhandbuch Seite 13